秒速时时彩官网

产品分类

拉丝哪里生产铝合金拉篮

  • 所属分类:拉丝

  • 点击次数:
  • 发布日期:2018/09/03
  • 在线询价
详细介绍

生产铝合金电缆厂家

尽管固态氧化铝的密度近似于铝熔体的密度,在进入铝熔体内部后,经过足够长的时间才会沉至坩埚底陪。而铝熔体被氧化后形成的氧化铝膜,却仅与铝熔体接触的一面是致密的,与空气接触的一面疏松且有大量直径为60--100A的小孔,其表面积大,吸附性强,极易吸附在水汽,反有上浮的倾向。因此,在这种氧化膜与铝熔体的比重差小,将其混入熔体中,浮沉速度很慢,难以从熔体中排除,在铸件中形成气孔太夹杂。所以,转送铝熔体中关键是尽量减少熔融金属的搅拌,尽量减少熔体与空气的接触。

Although the density of solid alumina is similar to that of aluminum melt, it takes a long enough time to sink to the bottom of the crucible after entering the inner part of the aluminum melt. However, the alumina film formed by oxidation of aluminium melt is compact only on the one side which contacts with aluminium melt. The one side which contacts with air is loose and has a large number of pores with diameters of 60-100A. Its surface area is large and its adsorption is strong. It is easy to adsorb water vapor and has the tendency to float. Therefore, the specific gravity difference between the oxide film and the aluminum melt is small, and when the oxide film is mixed into the melt, the floating and sinking speed is very slow, so it is difficult to remove from the melt, and the porosity is too inclusion in the casting. Therefore, the key to transfer the aluminum melt is to minimize the stirring of the molten metal and to minimize the contact between the melt and the air.

本文网址:/product/617.html

关键词:哪里生产铝合金拉篮,生产铝合金电缆厂家,生产铝合金门窗设备

最近浏览:

相关产品:

相关新闻:

友情链接:天天彩票注册  天天彩票安卓版下载  天天彩票平台  天天彩票走势  天天彩票网址  天天彩票APP官网  天天彩票论坛  天天彩票技巧  天天彩票提现不了  天天彩票登陆  天天彩票预测  天天彩票首页  天天彩票官网  天天彩票官网  天天彩票网是正规的吗  天天彩票预测  天天彩票开奖  天天彩票网站  天天彩票手机登录  天天彩票手机版下载  天天彩票怎么玩  天天彩票开户  天天彩票网址  天天彩票注册  天天彩票首页  天天中彩票  天天彩票网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!